Match the Grit to Your Sanding Stage
The grit number on a sanding disc tells you how coarse the abrasive is. Lower numbers mean larger, more aggressive particles that remove material fast. Higher numbers mean finer particles that leave a smoother surface. For model projects, you typically move through two or three grits as you go from shaping to finishing.
Three Aluminum Oxide Discs for the #86794 Sander
- 10" Alum Oxide Disc 80G: 80 grit rating for medium-coarse sanding applications 80 grit is your starting point for removing saw marks, rough edges, or old paint quickly. It cuts fast but leaves a scratch pattern that needs finer grits to erase.

10" Alum Oxide Disc 80G - 10" Alum Oxide Disc 180G: 180 grit rating for fine to medium sanding tasks 180 grit is the workhorse intermediate step. It smooths the 80-grit scratches and prepares the surface for primer or a final finish without over-sanding.

10" Alum Oxide Disc 180G - 10" Alum Oxide Disc 240G: Grit rating of 240 for fine finishing work 240 grit is for the final pass before paint, clear coat, or assembly. It leaves a refined surface that minimizes visible sanding marks under a finish.
How the Discs Work with Your Sander
All three discs are 10 inches in diameter, cloth-backed for durability and flexibility, and use a self-adhesive backing to attach to the #86794 Variable Speed Sander. The self-adhesive design means you peel off the old disc and stick the new one onto the sander's pad—no hook-and-loop or clamps. The cloth backing helps the disc conform to curved surfaces without tearing, which matters when you are sanding model contours.
Because the discs are designed specifically for the #86794 sander, you do not need to worry about fit or alignment. The 10-inch diameter gives you broad coverage for flat panels while still being manageable for smaller parts.
80 vs 180 vs 240: When to Use Each
- 80 grit – Fast stock removal: Use this first when you need to remove material, shape a part, or strip a finish. It is aggressive, so keep the sander moving to avoid digging in. Do not use it on thin veneers or delicate details.
- 180 grit – General smoothing: Switch to 180 grit after the rough shape is done. It removes the 80-grit scratches and leaves a surface ready for primer. This is often the only grit you need for parts that will be painted or hidden.
- 240 grit – Fine finishing: Reach for 240 grit when the surface will be clear-coated, stained, or left bare. It produces a smooth, even surface with minimal visible scratch pattern. It cuts slowly, so do not use it to remove material.
What the Catalog Does Not Settle
The supplied records confirm each disc's grit rating, diameter, backing, and intended sander model. They do not specify recommended sanding speeds, pressure, or whether the discs can be used wet. For those details, refer to your sander's manual and test on scrap material first. The self-adhesive backing is designed for dry use; using it with liquids may reduce adhesion.



