Why Silicon Carbide Disks for Model Finishing?
When you are sanding hard, heat-generating materials like hardened steel tools, stone, ceramics, tiles, or glass, standard aluminum oxide paper wears out fast. Silicon carbide abrasive is harder — second only to diamond — so it stays sharp longer on these demanding surfaces. For model finishing, that means cleaner edges and fewer disk changes when you work on metal parts, ceramic details, or glass components.
Micro-Mark offers two silicon carbide sanding disks: a medium 80 grit and a fine 180 grit. Both are 10 inches in diameter, waterproof, and self-adhesive, making them easy to attach to compatible power sanders or orbital sanders.
Disk Specifications at a Glance
- 10" Silicon Carbide 80G Sanding Disk: 10" diameter, waterproof, self-adhesive disk, medium 80 grit. Use on heat generating materials, hardened steel, stone, ceramics, glass. The 80 grit is your starting point for fast material removal on hard surfaces like hardened steel tools or ceramic parts.

10" Silicon Carbide 80G Sanding Disk - 10" Silicon Carbide 180G Sanding Disk: 10" diameter, waterproof, self-adhesive disk, fine 180 grit. Use on heat generating materials, hardened steel, stone, ceramics, glass. The 180 grit refines the surface after initial sanding, giving a smoother finish on glass, ceramics, or stone.

10" Silicon Carbide 180G Sanding Disk
Attaching the Disk to Your Sander
Both disks use a self-adhesive backing, so no additional glue or hook-and-loop pad is needed. Follow these steps for a secure attachment.
- Clean the sander pad: Remove any dust or residue from the sander's platen. A clean surface ensures the adhesive bonds firmly.
- Peel and position: Peel the protective liner from the disk. Align the disk with the sander pad, then press it down evenly from the center outward to avoid air bubbles.
- Check adhesion: Run the sander briefly at low speed to confirm the disk is seated flat. If edges lift, press them down again before starting your work.
Choosing the Right Grit for Your Material
For rough shaping or removing heavy scratches on hardened steel, stone, or ceramics, start with the 80 grit disk. It cuts aggressively and handles the heat generated by friction on these hard materials. Once you have the basic shape or surface, switch to the 180 grit disk to smooth the surface and prepare it for painting or polishing.
If you are working on glass, the 80 grit can be used to grind edges or remove sharp burrs, then the 180 grit refines the edge to a satin finish. On ceramics, the 80 grit removes glaze or rough spots, while the 180 grit leaves a uniform matte surface.
Using the Disks Wet or Dry
These disks are waterproof, which means you can use them with water as a lubricant to reduce heat and dust. Wet sanding is especially useful on glass and ceramics to prevent cracking from thermal shock and to keep the abrasive cutting freely. Simply mist the surface with water before sanding, or dip the disk briefly. For dry sanding on metals or stone, work in a well-ventilated area and wear a dust mask.
Compatibility Notes
The disks were designed for Micro-Mark's retired #86794 Variable Speed Sander, but they also work with other brands' power sanders and orbital sanders that accept a 10-inch self-adhesive disk. Before buying, check that your sander's platen is 10 inches in diameter and uses a self-adhesive mounting system. If your sander uses hook-and-loop, these disks will not attach without an adapter.
What the Catalog Does Not Settle
The supplied information does not specify a recommended operating speed, pressure, or duration for these disks. When using them on a sander, start at a low speed and increase gradually, applying light pressure. Let the abrasive do the work — forcing the disk can cause premature wear or damage to the material. Always follow the safety instructions for your specific sander model.


