Quality Tools & Supplies for Hobbys, DIY & Crafts - Micro-Mark Tools

Micro-Mark Air 鋼藍色漆料 20ml

Micro-Mark Air 鋼藍色漆料 20ml - Main image
$2.65 $3.95 In stock

Category: 壓克力噴槍顏料

  • 預先稀釋,適用於噴筆塗裝,流暢均勻
  • 冷色調、柔和藍灰色,非常適合海軍飛機、科幻面板和鋼結構
  • 專為精確覆蓋精細細節、大面積和分層舊化效果而設計
  • 與 Gunmetal、Engine Black 和 Reefer Gray 搭配效果佳,可營造工業風格
  • 用於鐵道模型,可塗裝貨車車廂等滾動車輛。也適用於鋼結構建築、倉庫和工廠。適合用於金屬屋頂
  • 美國製造,採用優質噴筆專用壓克力配方

商品描述

Air Steel Blue 提供與筆塗版本(商品編號 #29379)相同的豐富冷色調藍灰色,但專為 噴筆使用而配製——無需稀釋。噴塗順暢且遮蓋力一致,非常適合 鋼製船體、飛機機身、裝甲板和科幻元素。表面為消光帶有輕微光澤,適合逼真的金屬模擬效果,而不會過度反光。

模型應用場景

• 海軍與飛機模型:飛機底部面板、船艦內部結構和航空母艦甲板機械
• 科幻模型:無人機、動力裝甲、太空船外殼
• 工業場景模型:鋼樑、倉庫支架、舊化鷹架
• 鐵道場景:鋼橋、貨運設備、輪式底盤
• 裝甲與軍事裝備:迫擊砲、野戰裝備、火砲外殼

建議搭配

• Gunmetal 或 Sabre Steel 用於武器或裝甲板的乾刷高光效果
• Tarnished Black 或 Engine Black 用於陰影強調或滲線
• Reefer Gray 用於氧化鋼材的舊化褪色效果
• Depot Buff 用於塗裝鐵路支撐基礎設施時增加對比

噴筆技巧

  • 在 18–22 PSI 下噴塗,以獲得最佳控制
  • 讓薄層堆疊至完全覆蓋
  • 理想的底層,適用於 剝落液 或 鹽漬舊化技法
  • 在黑色或深灰色底漆上使用,可加深金屬色調

如需自訂調色,可使用 Micro-Mark Acrylic Airbrush Thinner。Air Steel Blue 包含在 Airbrush Railroad Acrylic Paint Set 中。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Charlotte ★★★★★

Sprayed this straight from the bottle on a 1/72 sci-fi panel and it laid down smooth with zero tip dry. The muted blue-gray is exactly the steel tone I wanted, and it covers fine detail in one pass without flooding the panel lines. Twenty ml goes further than I expected too.

Violet ★★★★★

I thinned a lot of acrylics myself for years and always ended up with tip dry or spatter, but this one went straight into the airbrush and laid down smooth, even coats on the panel lines. The 20ml bottle is small, though I only needed a few drops per pass so it's lasting fine.

Kevin ★★★★★

The muted blue-gray is exactly the color I wanted for the panel work on my sci-fi build, and it covered the fine details in one pass. No thinning needed, which saved me a lot of guesswork at the bench.