Two Key Decisions: Width and Tooth Count
Every band saw blade for model making is a trade-off between straight-line speed, curve capability, and surface finish. The two numbers that define this trade-off are blade width (the distance from tooth tip to back edge) and TPI (teeth per inch).
Micro-Mark stocks two blades that illustrate the range: a 0.180" wide, 14 TPI blade and a 0.250" wide, 24 TPI blade. Both are 41-7/8" long and cut mild steel, soft metals, wood, and plastics. The choice depends on your material thickness, hardness, and the shapes you need to cut.
Blade Width vs. Curve Radius
- Band Saw Blade .180 x 14 TPI: A 0.180 wide blade will cut a minimum radius of ¾ inch. If your model calls for tight inside curves or scrollwork, a narrower blade is needed. This blade handles medium-radius curves in thicker stock.

Band Saw Blade .180 x 14 TPI - Band Saw Blade .250 x 24 TPI: A 0.250 wide blade will cut a minimum radius of 1 inch. This wider blade is better for long, straight cuts and gentle arcs. It resists deflection in dense materials but cannot navigate tight corners.

Band Saw Blade .250 x 24 TPI
TPI and Surface Finish
Tooth count controls how aggressive the cut is and how smooth the edge looks. The catalog explains it directly: use coarse 14 TPI blades for fast, aggressive cutting of thick or soft materials, and fine 24 TPI blades for smooth cuts in thin or hard materials.
For a model maker, that means the 0.180" x 14 TPI blade is a good choice when you need to remove material quickly or work with soft woods and plastics. The 0.250" x 24 TPI blade is better when you want a clean edge on thin metal or hard plastic parts and are willing to feed more slowly.
Which Blade for Your Project?
- 0.180" x 14 TPI: Best for: thick softwood blocks, plastic sheets, or mild steel where speed matters more than finish. Can cut a ¾" radius curve. Price: USD 26.25.
- 0.250" x 24 TPI: Best for: thin metal, hard plastic, or any material where a smooth edge saves sanding time. Straight cuts and large-radius curves only (1" minimum radius). Price: USD 31.05.
Putting It Together
Start by looking at your model plans. If you see tight curves, choose a blade width under 0.180" (Micro-Mark carries narrower options). If most cuts are straight and you value a fine finish, the 0.250" x 24 TPI blade is a strong match. For general-purpose work in mixed materials, the 0.180" x 14 TPI offers a good balance of speed and curve ability.
Both blades share the same 41-7/8" length, so they fit the same saws. Blade selection is based on material hardness, cutting speed, and finish—not on brand or price alone.


