What to Look for in Clamp-On Trammel Points
When you need to draw large circles or arcs on a workpiece, a beam compass is the go-to layout tool. Clamp-on trammel points turn any straight beam into a precision compass, giving you flexibility in radius without buying multiple fixed compasses. The key decision is matching the trammel set to your beam stock and your typical layout tasks.
The Micro-Mark Clamp-On Trammel Points (Set of 2) fit beams up to 1 ¼ inches thick by any width or length. That means you can use a yardstick, a strip of plywood, or even a metal ruler as the beam. The set includes two clamping units: one holds the pivot point, the other holds the marking point.
Clamp-On Trammel Points (Set of 2) at a Glance
- Clamp-On Trammel Points (Set of 2): Fits beams up to 1 ¼ inches thick by any width or length Determines which beams you can use. If your typical beam stock is thicker than 1 ¼ inches, these trammels won't clamp securely.

Clamp-On Trammel Points (Set of 2) - Clamp-On Trammel Points (Set of 2): Point can be removed to insert pencil to draw circle Lets you switch from a metal scribe to a pencil for visible layout lines on wood, paper, or other materials.
- Clamp-On Trammel Points (Set of 2): Can be used as a yardstick compass to get exact circle diameter A yardstick or ruler beam gives you direct diameter measurement, simplifying layout without separate measuring steps.
Beam Compatibility Matters
The most important specification for clamp-on trammel points is the beam thickness they accept. The Micro-Mark set works with beams up to 1 ¼ inches thick. If you plan to use a thick hardwood board or a metal bar, confirm it fits within that limit. Beam width and length are unrestricted, so you can use a long yardstick for large-radius circles or a short scrap for smaller arcs.
For woodworking, a common beam choice is a yardstick or a straight 1x2 board. The trammel clamps should grip firmly without slipping during use. If your beam is thinner than the clamp's range, shimming may be needed, though the supplied information does not specify a minimum thickness.
Marking Options: Scribe vs. Pencil
The trammel point on the marking unit can be removed to insert a pencil. This gives you two marking modes: a metal scribe for scratch lines on wood or plastic, and a pencil for visible marks on paper or light-colored surfaces. If you mostly work with dark woods or need fine scribed layout lines, the included point works well. For general woodworking where you want a clear pencil line, swapping in a pencil is straightforward.
The pivot point stays fixed, so you can set the exact radius once and repeat arcs or circles without remeasuring.
How to Choose the Right Trammel Set
For most woodworking layout tasks, a clamp-on trammel set like the Micro-Mark Clamp-On Trammel Points covers the essentials: large circles, arcs, and even dividers-style marking. The key trade-off is beam thickness compatibility. If your shop uses beams thicker than 1 ¼ inches, you may need a different trammel design. Otherwise, this set offers a simple, affordable way to add precision circle layout to your tool collection.
Because the set is a Micro-Mark exclusive, it is designed with hobbyists and model makers in mind, but it works equally well for full-size woodworking projects.

